Copper Nickel 90-10 Tube

When cooling water, temperature, steam, and condensate fully rule out all copper materials, the supplied Copper Nickel 90-10 Tube is preferred. Our tube provides excellent protection against erosion and impingement in ocean water flowing at rates of more than 3-3.5 m/s due to the hardness and oxide type whereby the surface is auto-secured. Our Copper Nickel 90-10 Tube is very resistant to cracking and stress corrosion. Unfortunately, it is equally vulnerable to water-based assaults. As a result, consumers are not advised to use this tube in standing or slow-moving water.

COPPER NICKEL 90/10

EQUIVALENT SPECIFICATIONS

C70600 /ASTM B466 Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought copper-nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance.

TYPICAL USES for C70600/ASTM B466 Copper Nickel 90/10:

AUTOMOTIVE: Power Steering Tube, Brake Lines CONSUMER: Screw Lamp Bases INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses PLUMBING: Flanges

CHEMICAL COMPOSITION

PHYSICAL PROPERTIES

SIZES AVAILABLE :

Copper Nickel Tube for Oil Cooler, Generator Sizes available are:

• 38.10 mm Outer Diameter x 2 mm Thickness x 3 Meter Long
• 25.40 mm Outer Diameter x 1.5 mm Thickness x 3 Meter Long
  
• 19 mm Outer Diameter x 1.5mm Thickness x 3 Meter Long
• 16.41 mm Outer Diameter x 1.5mm Thickness x 3 Meter Long
• 31.75mm Outer Diameter x 2mm thickness x 3 Meter Long
  

FAQs of Copper Nickel 90-10 Tube: